POWERFUL, ROBUST, SMALL

All in one carrier board for The Cube

ALL PACKED IN ULTRA SMALL SIZE

45 grams only

Quality first, we use high quality components

Raspberry Pi Compute Module 3

1GHz Processor

1GB RAM

4Gbytes eMMC flash

MicroSD card slot

CSI camera port

Dronee Pilot comes with pre-installed Rasbian.

Ublox M8N GNSS module

Fast, Accurate and Reliable GNSS positioning 

Concurrent reception of up to 3 GNSS (GPS, Galileo, GLONASS, BeiDou)

Industry leading -167 dBm navigation sensitivity

Advanced jamming and spoofing detection 

If you are interested in  other u-blox module on the board contact us.

Microhard P900

Supports up to 276kbps

Adjustable Transmit Power 100mW-1W.

Low Power Consumption

Extreme noise and interference rejection.

Note: if you want  400Mhz radio module on on Dronee Pilot, please contact us.

Taoglass Antenna GPS/GLONASS/GNSS

Frequency: 1575.42 MHz

Gain: 1.5 dBic

Technology: Patch Antenna

Frequency Range: 1574 MHz to 1610 MHz

Impedance: 50 Ohms

Mounting Style: SMD/SMT

Next Gen Airspeed Sensor

MS4525D series

Faster, More  Accurate and  Temperature Compensated.

Operating Pressure: 1 PSI (6.89kPa)

Accuracy: +- 25%.

Maximum Pressure: 20 PSI (137.9kPa)

Operating Temperature: -40°C ~ 125°C.

The Cube FMU

Flight Management Unit

Isolated and Dampened IMU

Triple Redundant System

Blog posts

Dronee Pilot Pinout and Technical Drawing

Dronee Pilot Pinout and Technical Drawing

Dronee Pilot Pinout and Technical Drawing  Download 
How to use RPI3 as a companion device between pixhawk(PX4,APM) and ground station,with Dronee Pilot.

How to use RPI3 as a companion device between pixhawk(PX4,APM) and ground station,with Dronee Pilot.

Below topics cover how to use RPI3 as repeater, as companion device and both. First thing in RPI3 is to enable serial port for the the transmitter....

Dronee

Siidisaba 7, Tallinn, Estonia

Gagarina, 26, Brovary, Kyivs'ka oblast, Ukraine

email: [email protected]

Skype: tomi_piriyev